ENERPAC – New SFP-Series Split Flow Hydraulic Pumps

The SFP-Series electrically driven Split Flow Hydraulic Pumps are Enerpac’s new solution for multi-point lifting applications and when lifting loads on multiple points, they are a far better alternative to using separately operated pumps. Split Flow Pumps are a safe and economical solution where synchronisation of up to

4% is acceptable and the load is evenly distributed across the lifting points.

The Split Flow Pump has manual valves with joysticks or solenoid valves with a pendant to enable controlled lifting of the load. The load can be lifted simultaneously using single or double-acting cylinders. Depending on the application, the lifting points can be operated individually of simultaneously.

Applications

The Split Flow Pumps can be used in a wide variety of lifting and pushing applications, such as lifting a bridge deck, foundation repair by lifting an ancient wind mill, stage lifting of heavy transports, and pushing of tunnel segments.

Features

  • 2, 4 or 6 split-flow outlets with equal oil flow
  • 7 different flows from 0,45 – 4,2 L/min at 700 bar
  • Advance, hold and retract function
  • Rigid protection frame with forklift pockets and lifting eyes
  • Solenoid valves and pressure relief valves and 4 circuit manifold (top picture)
  • Pendant for solenoid controlled valves (bottom picture)

Solenoid valves and pressure relief valves

LEARN MORE ABOUT MULTI SPLIT PUMPS